Window protection during construction

WindOcoat Window and Frame Protection, 5 gallon

WindOcoat Window and Frame Protection, 1 gallon

WindOcoat 4880 is a peelable window and glass protection that can even protect frames. Can be applied via roller or by sprayer and can be safely used up to 365 days. Simple spray or paint on, let harden and then peel away protection at project's end. (light blue coating) An easy to use contruction window and glass protection product for use in both humid and dry conditions. Cures to form good hard water resistant film. Best if applied at 45F to 100F. The cured coatingis excellent – below 30F to above 220F. One Gallon of WindOcoat can thoroughly cover 200 square feet. Window films also available. 1 gallon can

$51.90
Availability: In stock
SKU
WC-4880
Qty:  

WindOcoat saves you time, money and a lot of hassle. Without WindOcoat, glass generally requires at least two heavy-duty cleanings before a job is finished. A recent market research study found that WindOcoat could save many dollars per construction project in cleanup costs. With WindOcoat you can say goodbye to these time- and money-wasting cleanups.

WindOcoat can be removed by peeling. It will turn white when wet but it will not come off unless peeled.  WindOcoat is water resistant when it is dry film. Water Resistant WindOcoat presents no fire hazard as received, during, or after application. WindOcoat is non-flammable in liquid or dry state.

  • Cost effective solution for Window, Door and Frame damage
  • Virtually eliminates window, frame and glass damage caused during construction
  • Water-based product that is rated as a low-density polyethylene
  • Provides Temporary protection through final inspection
  • Value added service for home buyers satisfaction

 

WindOcoat is available in 1gallon, 5 gallon, 55 gallon & 110 gal/220 gal disposable tote tanks (call for pricing and availability). 1 Gallon of WindoCoat will cover approximately 200 square feet with thick and durable protection.

The best way to apply WindOcoat 4880 is by airless spray. This product is formulated not to sag up to 24 mils thick. The product can be applied from 60F to 120 F.  Once the water has evaporated, WindOcoat can withstand temperatures of -20F to + 140F and still be flexible to peel in one sheet. The peeling has to be accomplished at 60 to 100F.  Below 60 F the coating is on the brittle side and above 110 F it is too soft and stretches on peel. 
This coating is good on outdoor exposures up to 12 months.

So WindOcoat your windows! It protects the glass, reduces cleanup times, and keeps your customers happy. It also helps you deliver a beautiful home, with glistening new windows; clean, unscratched windows! Builders Site Protection also offers peelable Window Films.

 

 

Made in the USA

Write Your Own Review
You're reviewing:WindOcoat Window and Frame Protection, 1 gallon
Your Rating